Nanoscale pillars as a building block for future information technology
In today's information technology, light and electron charge are the main media for information processing and transfer. In the search for information technology that is even faster, smaller and more energy-efficient, scientists around the globe are exploring another property of electrons – their spin. Electronics that exploit both the spin and the charge of the electron are called “spintronics”.
Just as the Earth spins around its own axis, an electron spins around its own axis, either clockwise or counterclockwise. The handedness of the rotation is referred to as spin-up and spin-down states. In spintronics, the two states represent the binary bits of 0 and 1 and thus carry information.
The information encoded by these spin states can in principle be converted by a light-emitting device into light, which then carries the information over a long distance through optic fibres. Such transfer of quantum information opens the possibility of future information technology that exploits both electron spin and light, and the interaction between them, a technology known as “opto-spintronics”.
The information transfer in opto-spintronics is based on the principle that the spin state of the electron determines the properties of the emitted light. More specifically, it is chiral light, in which the electric field rotates either clockwise or counter-clockwise when seen in the direction of travel of the light. The rotation of the electric field is determined by the direction of spin of the electron. But there is a catch.
“The main problem is that electrons easily lose their spin orientations when the temperature rises. A key element for future spin-light applications is efficient quantum information transfer at room temperature, but at room temperature the electron spin orientation is nearly randomized. This means that the information encoded in the electron spin is lost or too vague to be reliably converted to its distinct chiral light”, says Weimin Chen at the Department of Physics, Chemistry and Biology, IFM, at Linköping University.
Now, researchers from Linköping University and the Royal Institute of Technology have devised an efficient spin-light interface.
“This interface can not only maintain and even enhance the electron spin signals at room temperature. It can also convert these spin signals to corresponding chiral light signals travelling in a desired direction”, says Weimin Chen.
The key element of the device is extremely small disks of gallium nitrogen arsenide, GaNAs. The disks are only a couple of nanometres high and stacked on top of each other with a thin layer of gallium arsenide (GaAs) between to form chimney-shaped nanopillars. For comparison, the diameter of a human hair is about a thousand times larger than the diameter of the nanopillars.
The unique ability of the proposed device to enhance spin signals is due to minimal defects introduced into the material by the researchers. Fewer than one out of a million gallium atoms are displaced from their designated lattice sites in the material. The resulting defects in the material act as efficient spin filters that can drain electrons with an unwanted spin orientation and preserve those with the desired spin orientation.
“An important advantage of the nanopillar design is that light can be guided easily and more efficiently coupled in and out”, says Shula Chen, first author of the article.
The researchers hope that their proposed device will inspire new designs of spin-light interfaces, which hold great promise for future opto-spintronics applications.
###
The research has been supported by grants from the Swedish Research Council, the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University, and the Swedish Energy Agency.
For more information, please contact: Weimin Chen, Professor, weimin.chen@liu.se, +46 13 281795
The article: “Room-temperature polarized spin-photon interface based on a semiconductor nanodisk-in-nanopillar structure driven by few defects”, Shula Chen, Yuqing Huang, Dennis Visser, Srinivasan Anand, Irina A. Buyanova, & Weimin M. Chen. Nature Communications 9, 3575 (2018), published online September 3, doi: 10.1038/s41467-018-06035-1
Media Contact
All latest news from the category: Materials Sciences
Materials management deals with the research, development, manufacturing and processing of raw and industrial materials. Key aspects here are biological and medical issues, which play an increasingly important role in this field.
innovations-report offers in-depth articles related to the development and application of materials and the structure and properties of new materials.
Newest articles
NASA: Mystery of life’s handedness deepens
The mystery of why life uses molecules with specific orientations has deepened with a NASA-funded discovery that RNA — a key molecule thought to have potentially held the instructions for…
What are the effects of historic lithium mining on water quality?
Study reveals low levels of common contaminants but high levels of other elements in waters associated with an abandoned lithium mine. Lithium ore and mining waste from a historic lithium…
Quantum-inspired design boosts efficiency of heat-to-electricity conversion
Rice engineers take unconventional route to improving thermophotovoltaic systems. Researchers at Rice University have found a new way to improve a key element of thermophotovoltaic (TPV) systems, which convert heat…