Welding by fiber laser
It has to get by with as few additive materials as possible, and should under no circumstances influence or contaminate the materials. As an alternative to conventional joining techniques, laser welding offers a number of innovative solutions featuring high welding speeds, narrow weld seams and special process variants for joining transparent plastics.
A series of new beam sources enables laser characteristics to be specially adapted to these tasks. Highly advanced microsystems with complex welding contours for medical engineering and biotechnological applications, such as a new type of microfluidic chip with very narrow and closely spaced channels, make great demands on joining technology. The new chip has to be furnished with a cover film, for which the welding seam must be no more than 100µm wide.
The new TWIST® (Transmission Welding by Incremental Scanning Technique) contour-welding method developed by the Fraunhofer Institute for Laser Technology ILT meets these stringent requirements, producing high-quality welding seams at high process speeds. Based on fiber lasers, this innovative irradiation method can produce 100-µm-wide seams at a rate of up to 18 m/min.
Any potential degradation of the material due to the high intensity of the focused fiber laser light is avoided in the new process. For the welding of transparent plastics, the new beam sources enable the laser characteristics to be adapted to the polymers' absorption behavior, thus obviating the need for additional absorbers. This improved irradiation strategy preserves the advantages of laser transmission beam welding without influencing the surfaces of the components. It can be used for transparent and translucent polymers.
Contacts at the Fraunhofer ILT
If you have any questions regarding this topic, please feel free to contact our experts:
Fraunhofer Institute for Laser Technology ILT
Aachen, Germany
Dr. Alexander Olowinsky
Group manager packaging and interconnection
Micro technology department
Phone +49 241 8906-491
alexander.olowinsky@ilt.fraunhofer.de
Dr. Arnold Gillner
Head of the micro technology department
Phone +49 241-8906-148
arnold.gillner@ilt.fraunhofer.de
For any other questions or finding special experts please contact:
Dipl.-Phys. Axel Bauer
Head of marketing and communications
Fraunhofer-Institut für Lasertechnik ILT
Aachen, Germany
Phone: +49/241/8906-194
Fax: +49/241/8906-121
axel.bauer@ilt.fraunhofer.de
Media Contact
More Information:
http://www.ilt.fraunhofer.deAll latest news from the category: Process Engineering
This special field revolves around processes for modifying material properties (milling, cooling), composition (filtration, distillation) and type (oxidation, hydration).
Valuable information is available on a broad range of technologies including material separation, laser processes, measuring techniques and robot engineering in addition to testing methods and coating and materials analysis processes.
Newest articles
First-of-its-kind study uses remote sensing to monitor plastic debris in rivers and lakes
Remote sensing creates a cost-effective solution to monitoring plastic pollution. A first-of-its-kind study from researchers at the University of Minnesota Twin Cities shows how remote sensing can help monitor and…
Laser-based artificial neuron mimics nerve cell functions at lightning speed
With a processing speed a billion times faster than nature, chip-based laser neuron could help advance AI tasks such as pattern recognition and sequence prediction. Researchers have developed a laser-based…
Optimising the processing of plastic waste
Just one look in the yellow bin reveals a colourful jumble of different types of plastic. However, the purer and more uniform plastic waste is, the easier it is to…