Hips take walking in stride; ankles put best foot forward in run

The research could help inform the best ways of building assistive or prosthetic devices for humans, or constructing next-generation robotics, say NC State biomedical engineers Drs. Dominic Farris and Gregory Sawicki. The co-authors of a study on the mechanics of walking and running in the journal Interface, a Royal Society scientific journal, Sawicki and Farris are part of NC State's Human PoWeR (Physiology of Wearable Robotics) Lab.

A long history of previous studies have focused on the biomechanics of human locomotion from a whole-body or individual limbs perspective. But this study is the first to zoom in on the mechanical power generated by specific lower-limb joints in a single comprehensive study of walking and running across a range of speeds, Sawicki says.

The study shows that, overall, hips generate more power when people walk. That is, until humans get to the point at which they're speed walking – walking so fast that it feels more comfortable to run – at 2 meters per second. Hips generate 44 percent of the power when people walk at a rate of 2 meters per second, with ankles contributing 39 percent of the power.

When people start running at this 2-meter-per-second rate, the ankles really kick in, providing 47 percent of the power compared to 32 percent for the hips. Ankles continue to provide the most power of the three lower limb joints as running speeds increase, although the hips begin closing the distance at faster speeds.

“There seems to be a tradeoff in power generation from hips to ankles as you make the transition from walking to running,” Sawicki says.

Both researchers are interested in how the study can help people who need assistance walking and running. Knowing which part of the lower limbs provide more power during the different activities can help engineers figure out how, depending on the person's speed and gait, mechanical power needs to be distributed.

“For example, assistive devices such as an exoskeleton or prosthesis may have motors near both the hip and ankle. If a person will be walking and then running, you'd need to redistribute energy from the hip to the ankle when the person makes that transition,” Farris says.

Ten people walked and ran at various speeds on a specially designed treadmill in the study; a number of cameras captured their gait by tracking reflective markers attached to various parts of the participants' lower limbs while the treadmill captured data from the applied force.

The study examined walking and running on level ground in order to gauge the differences brought about by increased speed; walking and running on inclined ground is fundamentally different than walking and running on flat ground, the researchers say, and would likely skew the power generation results toward the hips and knees.

The joint Department of Biomedical Engineering is part of NC State's College of Engineering and the University of North Carolina-Chapel Hill's School of Medicine.

“The mechanics and energetic of human walking and running: a joint level perspective”
Authors: Dominic James Farris and Gregory S. Sawicki, North Carolina State University
Published: Online May 24, 2011, in Interface
Abstract: Humans walk and run at a range of speeds. While steady locomotion at a given speed requires no net mechanical work, moving faster does demand both more positive and negative mechanical works per stride. Is this increased demand met by increasing power output at all lower limb joints or just some of them? Does running rely on different joints for power output than walking? How does this contribute to the metabolic cost of locomotion? This study examined the effects of walking and running speed on lower limb joint mechanics and metabolic cost of transport in humans. Kinematic and kinetic data for 10 participants were collected for a range of walking (0.75, 1.25, 1.75, 2.0 ms-1) and running (2.0, 2.25, 2.75, 3.25 ms-1) speeds. Net metabolic power was measured by indirect calorimetry. Within each gait, there was no difference in the proportion of power contributed by the each joint (hip, knee, ankle) to total power across speeds. Changing from walking to running resulted in a significant ( p=0.02) shift in power production from the hip to the ankle which may explain the higher efficiency of running at speeds above 2.0 ms-1 and shed light on a potential mechanism behind the walk–run transition.