Smart sensors for future fast charging batteries

© Fraunhofer ISC

European project “Spartacus” launched

Faster charging, longer stability of performance not only for electric vehicles but also for smartphones and other battery powered products. What still sounds like science fiction today might be feasible in the future, not least thanks to innovations the recently started “Spartacus” research project wants to achieve. By utilizing advanced sensors and cell management systems, “Spartacus” aims to reduce charging times by up to 20 percent without compromising the reliability and service life of batteries. The European Union is funding “Spartacus” as part of the Battery 2030+ research initiative.

Electric mobility is to become as user-friendly as possible. “Electric vehicles are already fast and quiet, but a major shortcoming so far is the long charging time compared to vehicles that are refuelled with fossil liquid or gaseous fuels,” says project coordinator Gerhard Domann from the Fraunhofer Institute for Silicate Research, Würzburg, describing the initial situation. Today, it is primarily the battery chemistry and design as well as the associated battery management system that prevent faster charging in order to protect the batteries from premature aging.

Factors that lead to premature aging, loss of performance or even critical failure are manifold and can be mutually reinforcing. If several factors come together, such as mechanical stress, low temperatures and excessively high charging or discharging currents, irreversible damage can occur in the battery. To avoid this, batteries usually are operated by integrated battery management systems in a mode that is as moderate as possible and does not exhaust all power reserves. The project consortium of Spartacus wants to exploit this potential in order to optimize and accelerate charging and discharging with a battery management system using advanced integrated sensors to monitor the actual battery condition while prolonging the battery’s life.

“Spartacus”, the acronym stands for “Spatially resolved acoustic, mechanical and ultrasonic sensing for smart batteries”. The research project aims to develop a low-cost sensor array technology for lithium-ion batteries combined with the concept of a cell management system for data prepossessing ensuring optimal charging and discharging depending on the battery’s condition. The project will focus on mechanical and acoustic sensors complemented by electrochemical impedance measurement and temperature sensors. “With the Spartacus sensor technology, errors and negative influences on battery life and performance should be detected at an early stage. Based on the sensor data, the cell and battery management system can control the charging and discharging processes accordingly to counteract premature battery aging and eliminate negative influences as far as possible,” says Gerhard Domann.

Smart sensor technology by Fraunhofer

Fraunhofer ISC is contributing its expertise in the development of smart sensors and in the analysis of aging processes in battery components for Spartacus. “The causes of premature battery aging have been preoccupying us for a long time, and we have refined our methodology in a number of projects to clarify these processes and find possible solutions”, reports project manager Dr. Jochen Settelein from Fraunhofer ISC. Important preliminary work in the field of intelligent sensor technology in earlier projects has led to new approaches based on acoustic and mechanical monitoring with ultrasonic and elastomer sensors to detect mechanical stress and changes in the battery cell. The recently started “Spartacus” project will build on this.

This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 957221

More about battery research at Fraunhofer R&D Center Electromobility FZEB:
https://www.fzeb.fraunhofer.de/

The EU research initiative Battery 2030+

The “Spartacus” project is part of BATTERY 2030+, a large-scale research initiative in Europe with the aim of developing more environmentally friendly and safer batteries with better performance, greater storage capacity options and longer life. Under the umbrella of Battery 2030+, research projects from three different areas are currently being launched:
– Development of a European infrastructure platform to combine large-scale calculations and experimental studies to map the complex reactions that take place in a battery.
– Development and integration of sensors that monitor and report the condition of the battery in real-time.
– Development of regenerative components that extend battery life and improve safety.

Battery 2030+ is coordinated by Prof. Kristina Edström, University of Uppsala, Sweden.
The consortium comprises 23 partner organizations and companies from 14 European countries.
More about Battery 2030+: https://battery2030.eu

FACTS AND FIGURES

Project name: „Spatially resolved acoustic, mechanical and ultrasonic sensing for smart batteries“ – Spartacus

EU-Budget: € 3 825 190
Duration: 2020/09/01 – 2023/08/31

Partners

FRAUNHOFER INSTITUTE FOR SILICATE RESEARCH ISC (Coordination), Germany
COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES CEA, France
CSEM CENTRE SUISSE D’ELECTRONIQUE ET DE MICROTECHNIQUE SA – RECHERCHE ET DEVELOPPEMENT, Switzerland
VRIJE UNIVERSITEIT BRUSSEL. Belgium
FUNDACION CIDETEC, Spain
ARKEMA FRANCE SA, France
ELRINGKLINGER AG, Germany

Wissenschaftliche Ansprechpartner:

Project Coordinator
Gerhard Domann | gerhard.domann@isc.fraunhofer.de | Fraunhofer Institute for Silicate Research ISC | Wuerzburg, Germany

http://www.isc.fraunhofer.de/

Media Contact

Dipl.-Geophys. Marie-Luise Righi PR und Kommunikation
Fraunhofer-Institut für Silicatforschung ISC

All latest news from the category: Power and Electrical Engineering

This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.

innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.

Back to home

Comments (0)

Write a comment

Newest articles

Innovative 3D printed scaffolds offer new hope for bone healing

Researchers at the Institute for Bioengineering of Catalonia have developed novel 3D printed PLA-CaP scaffolds that promote blood vessel formation, ensuring better healing and regeneration of bone tissue. Bone is…

The surprising role of gut infection in Alzheimer’s disease

ASU- and Banner Alzheimer’s Institute-led study implicates link between a common virus and the disease, which travels from the gut to the brain and may be a target for antiviral…

Molecular gardening: New enzymes discovered for protein modification pruning

How deubiquitinases USP53 and USP54 cleave long polyubiquitin chains and how the former is linked to liver disease in children. Deubiquitinases (DUBs) are enzymes used by cells to trim protein…