Tiny chip provides a big boost in precision optics

A 2 mm by 2 mm integrated photonic chip developed by Jaime Cardenas, assistant professor of optics, and PhD student Meiting Song (lead author) will make interferometers—and therefore precision optics—even more powerful. Potential applications include more sensitive devices for measuring tiny flaws on mirrors, or dispersion of pollutants in the atmosphere, and ultimately, quantum applications.
Credit: J. Adam Fenster/University of Rochester

University of Rochester researchers for the first time package a way of amplifying interferometric signals using inverse weak value amplification —without increase in extraneous input or “noise”—on an integrated photonic chip.

By merging two or more sources of light, interferometers create interference patterns that can provide remarkably detailed information about everything they illuminate, from a tiny flaw on a mirror, to the dispersion of pollutants in the atmosphere, to gravitational patterns in far reaches of the Universe.

“If you want to measure something with very high precision, you almost always use an optical interferometer, because light makes for a very precise ruler,” says Jaime Cardenas, assistant professor of optics at the University of Rochester.

Now, the Cardenas Lab has created a way to make these optical workhorses even more useful and sensitive. Meiting Song, a PhD student, has for the first time packaged an experimental way of amplifying interferometric signals—without a corresponding increase in extraneous, unwanted input, or “noise”—on a 2 mm by 2 mm integrated photonic chip. The breakthrough, described in Nature Communications, is based on a theory of weak value amplification with waveguides that was developed by Andrew Jordan, a professor of physics at Rochester, and students in his lab.

Jordan and his group have been studying weak value amplification for over a decade. They have applied mode analysis in a novel way on free space interferometer with weak value amplification, which bridged the gap between free space and waveguide weak value amplification. Therefore, they were able to prove the theoretical feasibility of integrating weak value amplification on a photonic chip.

“Basically, you can think of the weak value amplification technique as giving you amplification for free. It’s not exactly free since you sacrifice power, but it’s almost for free, because you can amplify the signal without adding noise—which is a very big deal,” Cardenas says.

Weak value amplification is based on the quantum mechanics of light, and basically involves directing only certain photons that contain the information needed, to a detector. The concept has been demonstrated before, “but it’s always with a large setup in a lab with a table, a bunch of mirrors and laser systems, all very painstakingly and carefully aligned,” Cardenas says.

“Meiting distilled all of this and put it into a photonic chip,” Cardenas says. “And by having the interferometer on a chip, you can put it on a rocket, or a helicopter, in your phone—wherever you want—and it will never be misaligned.”

The device Song created does not look like a traditional interferometer. Instead of using a set of tilted mirrors to bend light and create an interference pattern, Song’s device includes a waveguide engineered to propagate the wavefront of an optical field through the chip.

“This is one of the novelties of the paper,” Cardenas says. “No one has really talked about wavefront engineering on a photonic chip.”

With traditional interferometers, the signal to noise ratio can be increased, resulting in more meaningful input, by simply cranking up the laser power. But there’s actually a limitation, Cardenas says, because the traditional detectors used with interferometers can handle only so much laser power before becoming saturated, at which point the signal to noise ratio can’t be increased.

Song’s device removes that limitation by reaching the same interferometer signal with less light at the detectors, which leaves room to increase the signal to noise ratio by continuing to add laser power.

Bottom line: “If the same amount of power reaches the detector in Meiting’s weak value device as in a traditional interferometer, Meiting’s device will always have a better signal to noise ratio,” Cardenas says. “This work is really cool, really subtle, with a lot of very nice physics and engineering going on in the background.”

Next steps will include adapting the device for coherent communications and quantum applications using squeezed or entangled photons to enable devices such as quantum gyroscopes

Other collaborators include Yi Zhang and Juniyali Nauriyal of the Cardenas lab, John Steinmetz of the Department of Physics and Astronomy, and Kevin Lyons of Hoplite AI.

The project was funded by A. N. Jordan Scientific, in partnership with Leonardo DRS, and in part by the Center for Emerging and Innovative Sciences (CEIS). Fabrication was performed at the Cornell NanoScale Facility, with support from the National Science Foundation.

Journal: Nature Communications
DOI: https://doi.org/10.1038/s41467-021-26522-2
Method of Research: Experimental study
Subject of Research: Not applicable
Article Title: Enhanced on-chip phase measurement by inverse weak value amplification
Article Publication Date: 29-Oct-2021

Media Contact

Robert Marcotte
University of Rochester
bmarcotte@ur.rochester.edu
Office: 585-329-3583

Media Contact

Robert Marcotte
University of Rochester

All latest news from the category: Physics and Astronomy

This area deals with the fundamental laws and building blocks of nature and how they interact, the properties and the behavior of matter, and research into space and time and their structures.

innovations-report provides in-depth reports and articles on subjects such as astrophysics, laser technologies, nuclear, quantum, particle and solid-state physics, nanotechnologies, planetary research and findings (Mars, Venus) and developments related to the Hubble Telescope.

Back to home

Comments (0)

Write a comment

Newest articles

Innovative 3D printed scaffolds offer new hope for bone healing

Researchers at the Institute for Bioengineering of Catalonia have developed novel 3D printed PLA-CaP scaffolds that promote blood vessel formation, ensuring better healing and regeneration of bone tissue. Bone is…

The surprising role of gut infection in Alzheimer’s disease

ASU- and Banner Alzheimer’s Institute-led study implicates link between a common virus and the disease, which travels from the gut to the brain and may be a target for antiviral…

Molecular gardening: New enzymes discovered for protein modification pruning

How deubiquitinases USP53 and USP54 cleave long polyubiquitin chains and how the former is linked to liver disease in children. Deubiquitinases (DUBs) are enzymes used by cells to trim protein…