Programmable laser beams save more than 30 percent energy
In the METAMORPHA project, dynamic beam shaping for industrial applications is optimized and thus promoted to a new level.
© Fraunhofer ILT, Aachen, Germany
There is a new quality in laser material processing:
With a liquid crystal modulator, the beam profile of a laser can be freely programmed with high temporal resolution, but also split into identical copies. When this quality is combined with inline process monitoring and intelligent control, zero-defect manufacturing could become reality. In the EU project METAMORPHA, the partners will develop a system with all the fine details. The module will be tested in three applications with major industrial partners. The target is to achieve energy savings of at least 30 percent compared with conventional processes.
The technology: Fast, accurate and flexible
Much has been heard of ultrashort pulse (USP) lasers: With pulses in the pico- or femtosecond range, they can ablate even the hardest materials and do so with micrometer precision. Now that USP lasers are available with several hundred watts of output power, research and development are focusing on the question of how to “put the power to the pavement.”
© Fraunhofer ILT, Aachen, Germany / Volker Lannert
The Fraunhofer Institute for Laser Technology ILT in Aachen has been working on this question for years. In addition to various USP lasers, the team at Fraunhofer ILT also has the latest high-performance liquid crystal modulators for beam shaping in laser material processing. These modulators can tolerate up to 150 watts of laser power. In the EU project “METAMORPHA – Made-to-measure micromachining with laser beams tailored in amplitude and phase”, two of them are connected together in an optics module. This module can shape a beam profile individually or as a multi-beam and is compatible with various machines, for example 3-axis machines, 5-axis machines, turning machines or roll-to-roll.
With machine learning to zero-defect production
A major advantage of liquid crystal modulators is their ability to change the beam shape more than 60 times per second, which makes it possible to optimize the machining process or even change the process in a closed control loop. For this purpose, the process is continuously monitored and regulated with an intelligent control system. The process parameters and strategy are optimized using machine learning, which aims to produce parts that are completely free of defects. After a corresponding learning phase, processes can also be simulated and optimum process parameters predefined.
The main aim of the project is to save a significant amount of energy and resources in production. This is of particular interest to the three industrial partners Ceratizit, thyssenkrupp and Philips. They all have processes for which the planned laser-based manufacturing approach would mean enormous progress towards sustainable, economical production.
At thyssenkrupp, the laser is to structure embossing rolls. These are currently processed by electrical discharge machining, which consumes more than 10 GWh per year, of which the laser is expected to save 90 percent. Thanks to precise restructuring of worn surfaces with the laser, the lifespan of the embossing rollers should be increased ten-fold. Ceratizit plans to use the laser-based process to manufacture carbide punches and embossing dies and to recondition worn-out tools. A photonic process chain is to make this happen faster and more economically. And Philips wants to greatly simplify product manufacturing for the consumer sector by using a universal laser processing head.
EU project METAMORPHA
Together, the project partners want to bring together the latest laser technology, process knowledge and control know-how to replace established processes such as spark erosion or wet chemical etching and thus significantly save energy and resources. The reprocessing of tools by means of laser material processing is also an important step towards the sustainable use of resources. In the end, the laser technology used here will make a significant contribution to protecting the environment and health. The project started on September 1, 2022 and is funded by the European Union for a period of four years.
Project partners:
• Fraunhofer Institute for Laser Technology ILT (Coordinator)
• RWTH Aachen University – Chair of Optical Systems Technology (TOS)
• LASEA
• Universitat Politècnica de València (UPV)
• Datapixel
• fentISS
• Arditec
• Vivid Components Germany
• Ceratizit
• thyssenkrupp Steel Europe
• Philips Consumer Lifestyle
Wissenschaftliche Ansprechpartner:
Martin Osbild M. Sc.
Micro- and Nanostructuring Group
Telephone +49 241 8906-325
martin.osbild@ilt.fraunhofer.de
Dipl.-Phys. Martin Reininghaus
Head of the Micro- and Nanostructuring Group
Telephone +49 241 8906-627
martin.reininghaus@ilt.fraunhofer.de
Fraunhofer Institute for Laser Technology ILT
Steinbachstraße 15
52074 Aachen, Germany
www.ilt.fraunhofer.de
Weitere Informationen:
Media Contact
All latest news from the category: Power and Electrical Engineering
This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.
innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.
Newest articles
SpinMagIC: ‘EPR on a chip’ ensures quality of olive oil and beer
Spin-off company offers a tiny solution for a big problem. The first sign of spoilage in many food products is the formation of free radicals, which reduces the shelf-life and…
Impressive results against autoimmune disease
Severe systemic lupus no longer detectable after cancer medication treatment. The team at Charité – Universitätsmedizin Berlin is astounded by the huge improvement seen in a female patient with severe…
UCF researchers develop rapid test to detect dopamine
The sensor could serve as a low-cost and efficient tool for early detection of neurological disorders and conditions, including Parkinson’s disease, Alzheimer’s disease and depression. Dopamine, a neurotransmitter in our…