Eye implant may be used to treat diabetes

“The eye is our only window into the body, and it’s immune-privileged,” says Anna Herland, senior lecturer in the Division of Bionanotechnology at SciLifeLab at KTH Royal Institute of Technology, and the AIMES research center at KTH and Karolinska Institute
Credit: David Callahan/KTH Royal Institute of Technology

Researchers in Sweden have developed a microscale device for implantation in the eye, which presents new opportunities for cell-based treatment of diabetes and other diseases.

Aiming towards encapsulating insulin-producing pancreatic cells and electronic sensors, the 3D-printed device was developed by a team from KTH Royal Institute of Technology and Karolinska Institutet. The researchers reported the results of the work in the journal Advanced Materials.

The collaboration between KTH and Karolinska Institutet enables micro-organs—namely pancreatic islets or islets of Langerhans—to be positioned precisely in the eye without need for sutures. It offers the possibility of cell-based therapy, for example to treat Type 1 or Type 2 diabetes, using the eye as a base.

Anna Herland, senior lecturer in the Division of Bionanotechnology at SciLifeLab at KTH and the AIMES research center at KTH and Karolinska Institutet, says that the eye is ideal for this technology because it has no immune cells that react unfavorably in the first stage of implantation. Its transparency allows visual and microscopic study of what happens to the implant over time.

“The eye is our only window into the body, and it’s immune-privileged,” Herland says.

The device is designed as a wedge, about 240 micrometers long, allowing the structure to be mechanically fixed at the angle between the iris and the cornea in the anterior chamber of the eye (ACE). The work demonstrates the first mechanical fixation of a device in the anterior chamber of the eye.

“We designed the medical device to hold living mini-organs in a micro-cage and introduced the use of a flap door technique to avoid the need for additional fixation,” says Wouter van der Wijngaart, professor in the Division of Micro- and Nanosystems at KTH.

In tests on mice the device maintained its position in the living organism for several months, and the mini-organs quickly integrated with the host animal’s blood vessels and functioned normally, Herland says.

Per-Olof Berggren, professor of experimental endocrinology at Karolinska Institutet contributed to the research with years of experience in transplanting islets of Langerhans to the anterior chamber of the eye in mice.

“The current unit is unique and will among other things form the basis for our continued work to develop an integrated microsystem for studying the function and survival of the islets of Langerhans in the anterior chamber of the eye,” Berggren says. “This is also of great translational importance, as transplantation of Langerhans islands to the anterior chamber of the eye in humans is subject to clinical trials in patients with diabetes.”

Herland says the technology overcomes one obstacle to the development of cell therapies, including those for diabetes. Namely, there is no need for invasive methods to monitor the graft’s function and to guide care in order to ensure long-term transplant success.

“Ours is a first step towards advanced medical microdevices that can both localize and monitor the function of cell grafts,” she says.

She says the design makes it possible to position mini-organs such as organoids and islets of Langerhans without limiting the supply of nutrients to the cells.

“Our design will enable future integration and use of more advanced device functions such as integrated electronics or drug release.”

The research has been funded by SSF, Knut and Alice Wallenberg Foundation, ERC, Erling Persson Family Foundation and Jochnick Foundation, AIMES and Novo Nordisk Foundation.

The study’s conflict of interest statement notes that Per-Olof Berggren is a partner in Biocrine AB, which is also part of the study.

Journal: Advanced Materials
DOI: 10.1002/adma.202306686
Article Title: 3D-Printed Biohybrid Microstructures Enable Transplantation and Vascularization of Microtissues in the Anterior Chamber of the Eye
Article Publication Date: 10-Oct-2023
COI Statement: 3D-Printed Biohybrid Microstructures Enable Transplantation and Vascularization of Microtissues in the Anterior Chamber of the Eye

Media Contact

David Callahan
KTH, Royal Institute of Technology
callahan@kth.se
Office: 0737650593

Expert Contacts

Per-Olof Berggren
Karolinska Institutet
per-olof.berggren@ki.se

Anna Herland
KTH Royal Institute of Technology
aherland@kth.se
Office: +46 8 790 84 31
 @KTH Royal Institute of Technology

www.kth.se

Media Contact

David Callahan
KTH, Royal Institute of Technology

All latest news from the category: Medical Engineering

The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.

innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.

Back to home

Comments (0)

Write a comment

Newest articles

New Milestone in Quantum Research

Google Quantum AI and quantum physicists at Freie Universität Berlin publish groundbreaking results on Hamiltonian operators. A research team including researchers at Freie Universität Berlin and Google Quantum AI has…

Breakthrough in photonic time crystals

… could change how we use and control light. The new discovery could dramatically enhance technologies like lasers, sensors and optical computing in the near future. An international research team…

Custom Print Heads for 3D Printing

Achieving Individual Functional Integration. Wire or Fiber Encapsulating Additive Manufacturing (WEAM/FEAM) could significantly simplify the industrial production of components that require the integration of complex yet compact wiring, sensors, actuators,…