Rubber that doesn’t grow cracks when stretched many times

SEAS researchers have developed a multiscale approach that allows particle-reinforced rubber to bear high loads and resist crack growth over repeated use. Above, cracks grow in the left sample while the cracks in the right sample, made from the multiscale material, remain intact after 350,000 cycles.
Credit: Suo Group/Harvard SEAS

Multi-scale approach improves the fatigue threshold of particle-reinforced rubber.

Researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have increased the fatigue threshold of particle-reinforced rubber, developing a new, multiscale approach that allows the material to bear high loads and resist crack growth over repeated use. This approach could not only increase the longevity of rubber products such as tires but also reduce the amount of pollution from rubber particles shed during use.

The research is published in Nature.

Naturally occurring rubber latex is soft and stretchy. For a range of applications, including tires, hoses, and dampeners, rubbers are reinforced by rigid particles, such as carbon black and silica. Since their introduction, these particles greatly improve the stiffness of rubbers but not their resistance to crack growth when the material is cyclically stretched, a measurement known as the fatigue threshold.

In fact, the fatigue threshold of particle-reinforced rubbers hasn’t improved much since it was first measured in the 1950s. This means that even with the improvements to tires that increase wear resistance and reduce fuel consumption, small cracks can shed large amounts of rubber particles into the environment, which cause air pollution for humans and accumulate into streams and rivers.

In previous research, a team led by Zhigang Suo, the Allen E. and Marilyn M. Puckett Professor of Mechanics and Materials at SEAS, markedly increased the fatigue threshold of rubbers by lengthening polymer chains and densifying entanglements. But how about particle-reinforced rubbers?

The team added silica particles to their highly entangled rubber, thinking the particles would increase stiffness but not affect fatigue threshold, as commonly reported in the literature. They were wrong.

“It was quite a surprise,” said Jason Steck, a former graduate student at SEAS and co-first author of the paper. “We did not expect adding particles would increase the fatigue threshold but we discovered that it increased by a factor of ten.”

Steck is now a Research Engineer at GE Aerospace.

In the Harvard team’s material, the polymer chains are long and highly entangled, while the particles are clustered and covalently bonded to the polymer chains.

“As it turns out,” said Junsoo Kim, a former graduate student at SEAS and co-first author of the paper, “this material deconcentrates stress around a crack over two length scales: the scale of polymer chains, and the scale of particles. This combination stops the growth of a crack in the material.”

Kim is now an Assistant Professor of Mechanical Engineering at Northwestern University.

The team demonstrated their approach by cutting a crack in a piece of their material and then stretching it tens of thousands of times. In their experiments, the crack never grew.

Our approach of multiscale stress deconcentration expands the space of material properties, opening doors to curtailing polymer pollution and building high-performance soft machines,” said Suo, senior author of the study. 

“Traditional approaches to design new elastomeric materials missed these critical insights of using multiscale stress deconcentration to achieve high performance elastomeric materials for broad industrial uses,” said said Yakov Kutsovsky, an Expert in Residence at the Harvard Office of Technology Development and co-author of the paper. “Design principles developed and demonstrated in this work could be applicable across a wide range of industries, including high-volume applications such as tires and industrial rubber goods, as well as emerging applications such as wearable devices.”

Kutsovsky previously served as Chief Scientific Officer and Chief Technology Officer at Cabot Corporation for 15 years.

Harvard’s Office of Technology Development has protected the intellectual property associated with this project and is exploring commercialization opportunities.

The research was supported in part by the MRSEC grant DMR-2011754 and by the Air Force Office of Scientific Research under grant FA9550-20-1-0397.

Journal: Nature

DOI: 10.1038/s41586-023-06782-2

Media Contact

Leah Burrows
Harvard John A. Paulson School of Engineering and Applied Sciences
lburrows@seas.harvard.edu
Office: 617-496-1351

Media Contact

Leah Burrows
Harvard John A. Paulson School of Engineering and Applied Sciences

All latest news from the category: Materials Sciences

Materials management deals with the research, development, manufacturing and processing of raw and industrial materials. Key aspects here are biological and medical issues, which play an increasingly important role in this field.

innovations-report offers in-depth articles related to the development and application of materials and the structure and properties of new materials.

Back to home

Comments (0)

Write a comment

Newest articles

Pinpointing hydrogen isotopes in titanium hydride nanofilms

Although it is the smallest and lightest atom, hydrogen can have a big impact by infiltrating other materials and affecting their properties, such as superconductivity and metal-insulator-transitions. Now, researchers from…

A new way of entangling light and sound

For a wide variety of emerging quantum technologies, such as secure quantum communications and quantum computing, quantum entanglement is a prerequisite. Scientists at the Max-Planck-Institute for the Science of Light…

Telescope for NASA’s Roman Mission complete, delivered to Goddard

NASA’s Nancy Grace Roman Space Telescope is one giant step closer to unlocking the mysteries of the universe. The mission has now received its final major delivery: the Optical Telescope…