Flexible beam-shaping platform optimizes LPBF processes

With the system currently under construction (upper image), LCoS-SLMs can be used to generate almost any beam profile (Image in the text) in the LPBF process by selectively bending the phase front of the laser beam.
© Fraunhofer ILT, Aachen, Germany

A new approach to beam shaping will soon make additive manufacturing more flexible and efficient: Fraunhofer ILT has developed a new platform that can be used to individually optimize laser powder bed fusion (LPBF) processes. Customized beam profiles improve component quality, reduce material losses and enable previously impossible scaling of the build-up rate of the single beam process. Fraunhofer ILT will be presenting the test system, which is currently under construction, at Formnext in Frankfurt am Main from November 19 to 22.

Several studies have already impressively demonstrated that beam shaping in laser powder bed fusion (LPBF) can improve the efficiency and productivity of this additive manufacturing process. The Fraunhofer Institute for Laser Technology ILT and the Chair of Technology of Optical Systems (TOS) at RWTH Aachen University are working together to create a state-of-the-art test system enabling them to flexibly investigate complex laser beam profiles in power classes up to 2 kW, an innovation that can be used to customize solutions for industrial partners. This platform is designed to integrate LPBF processes more efficiently and robustly into industrial production so that they can meet its growing demands.

Disadvantages of the Gaussian distribution

Currently, laser powers of around 300 to 400 watts are common in many LPBF processes. However, the standard Gaussian laser beam they use has significant disadvantages: The high concentration of power in the beam center leads to local overheating and undesirable material evaporation as well as process instability, both of which can impair component quality due to spatter and pores. These issues significantly limit the scalability of the process, meaning that the laser power available in LPBF systems – often up to 1 kW – cannot be utilized for most materials.

“One way to speed up the process is to use several lasers and optical systems in parallel,” says Marvin Kippels, PhD student in the Laser Powder Bed Fusion Department at Fraunhofer ILT. “However, the costs scale at least proportionally to the number of systems installed.” In addition, these systems cannot always be utilized homogeneously in real applications, which means that productivity cannot be increased proportional to the increase in power. A promising approach is, therefore, to increase the productivity of the single beam process, which can also be transferred to multi-beam systems.

New possibilities through beam shaping

Previous studies have shown that even simple beam shapes with rectangular, ring-shaped or a combination of two Gaussian distributions produce promising results for both component quality and process speed. The potential of more complex beam shapes has so far been largely unexplored, as the necessary system technology was lacking. This is now changing thanks to the comprehensive investigations that researchers at Fraunhofer ILT have begun.

“The interaction of laser beam and material in the process is so complex due to its dynamics that simulations can only provide indications of the actual melt pool behavior,” explains Kippels, who is currently setting up a new type of system that uses LCoS-SLMs (Liquid Crystal on Silicon – Spatial Light Modulator), which will enable researchers to investigate almost any beam profile in the LPBF process.

As it has a laser power of up to 2 kW, the innovative system is a platform for testing new beam shapes at very high power levels in the LPBF process, which allows the suitable system technology to be identified for an individual LPBF task. “We can optimize the LPBF process in a targeted manner,” explains Kippels. He refers specifically to less material evaporation, less spatter formation, reduced melt pool dynamics, smoothened melt track surface, and increased process efficiency by adapting the melt track geometry.

Flexible beam profiles for specific requirements

With the system currently under construction (upper image), LCoS-SLMs can be used to generate almost any beam profile (this image) in the LPBF process by selectively bending the phase front of the laser beam.
© Fraunhofer ILT, Aachen, Germany

Currently, system technology is often promoted as able to produce specific beam shapes such as ring or top hat profiles. However, the choice of these beam shapes is not based on an in-depth understanding of the underlying process mechanisms, which is reflected in the sometimes contradictory literature on the subject. Only by fundamental understanding the processes can research specifically define which adjustments achieve a defined target, such as a certain melt track geometry.

This means that a beam shape must be developed and optimized for the application, which can then ideally be implemented in the company without needing LCoS-SLM technology. Thanks to this research platform, industrial customers and project partners of Fraunhofer ILT can already benefit from unprecedented flexibility in researching the laser-beam tool.

“We are still at the very beginning, but we can already see the enormous potential that beam shaping can offer for the LPBF process,” says Marvin Kippels. “There is no one perfect beam shape; every application has its own requirements. Thanks to our flexible beam shaping, we can find the ideal distribution for each process, the best process parameters for the task in question.” To achieve this goal, several departments at the Aachen institute support the work of Kippels and his team.

Visit us from November 19 to 22 in Frankfurt am Main at the Fraunhofer joint booth D31 in Hall 11 and learn more about the possibilities of flexible beam shaping.

Wissenschaftliche Ansprechpartner:

Marvin Kippels M.Sc.
Group Process & Systems Engineering
Telephone +49 241 8906-194
marvin.kippels@ilt.fraunhofer.de

Niklas Prätzsch M.Sc.
Group leader LPBF Process Technnology
Telephone +49 241 8906-8174
niklas.praetzsch@ilt.fraunhofer.de

Dr.-Ing. Tim Lantzsch
Head of Department Laser Powder Bed Fusion
Telephone +49 241 8906-193
tim.lantzsch@ilt.fraunhofer.de

Fraunhofer Institute for Laser Technology ILT
Steinbachstraße 15
52074 Aachen, Germany
www.ilt.fraunhofer.de

Weitere Informationen:

https://www.ilt.fraunhofer.de/en.html
https://formnext.mesago.com/frankfurt/en.html

Media Contact

Petra Nolis M.A. Marketing & Kommunikation
Fraunhofer-Institut für Lasertechnik ILT

All latest news from the category: Information Technology

Here you can find a summary of innovations in the fields of information and data processing and up-to-date developments on IT equipment and hardware.

This area covers topics such as IT services, IT architectures, IT management and telecommunications.

Back to home

Comments (0)

Write a comment

Newest articles

NASA: Mystery of life’s handedness deepens

The mystery of why life uses molecules with specific orientations has deepened with a NASA-funded discovery that RNA — a key molecule thought to have potentially held the instructions for…

What are the effects of historic lithium mining on water quality?

Study reveals low levels of common contaminants but high levels of other elements in waters associated with an abandoned lithium mine. Lithium ore and mining waste from a historic lithium…

Quantum-inspired design boosts efficiency of heat-to-electricity conversion

Rice engineers take unconventional route to improving thermophotovoltaic systems. Researchers at Rice University have found a new way to improve a key element of thermophotovoltaic (TPV) systems, which convert heat…