Research for Agile Production of Electric Motors
German Federal Ministry for Economic Affairs and Energy to Fund the 18 Partners in the AgiloDrive2 Research Project with a Total of 16.4 Million Euros until 2024.
Although electric mobility is becoming increasingly important, the general conditions for car manufacturers remain uncertain: What volumes can be expected? Which technologies are suitable? To solve this, scientists from KIT, the company Schaeffler, and 16 other industrial partners are addressing the question of how electric motors can be manufactured flexibly and yet economically in the future in the AgiloDrive2 research project. “This will sustainably strengthen the international competitiveness of the German automotive industry in order to integrate electric mobility not only technically but also economically into the energy and mobility transition,” says Professor Thomas Hirth, KIT Vice-President for Innovation and International Affairs.
AgiloDrive: Basic Principles of Digital Twins and Modular Systems
AgiloDrive, the pilot phase of the research project, which was funded by the Baden-Württemberg Ministry of Economics, Labor, and Tourism with about one million euros for 1.5 years, laid the basics: The project team, consisting of the wbk Institute of Production Science, the Institute of Electrical Engineering (ETI), and the Institute of Product Engineering (IPEK) of KIT as well as industrial partners, used digital twins, i.e. computer-aided simulations that reflect the production system very realistically and in detail. The team developed modular structures for electric motors and their production and built two demonstrators to provide the proof of concept for the implementation of a novel agile production system.
AgiloDrive2: Agile Production System for Electric Traction Motors
In the AgiloDrive2 project, which will be funded by the German Federal Ministry for Economic Affairs and Energy with 16.4 million euros at a total project volume of 33.7 million euros over the next three years, the three KIT institutes will work together with 17 industrial companies to develop future-proof modular structures, efficient design methods, data-based technologies as well as digital process chains. These will allow implementing an agile production system for electric traction motors as a real test environment. “Our agile solution approaches make it possible to operate production systems at demand-based operating points and also to use cost-reducing economies of scale through data-based process adaptation across different product series and technologies,” explains Professor Jürgen Fleischer, head of the wbk Institute of Production Science at KIT and scientific project manager at AgiloDrive2.
A team from IPEK, led by Professor Albert Albers, will research a modular product kit for the development of electric motors and devise a methodology for impact and risk analysis in early phases of product development. At ETI, scientists led by Professor Martin Doppelbauer will develop digital process chains for the efficient design of electrical machines. Together with its industrial partners, the wbk team will develop a production kit for electric motors and will analyze and optimize processes needed to manufacture electric traction motors flexibly and yet economically. The processes and technologies under consideration include classic handling and joining techniques, for example in the context of magnet assembly, but also highly complex special processes such as forming as well as the insertion and twisting of U-shaped hairpin coils made of flat copper wire. In addition, methods for the data-based enhancement of efficiency in production as well as the flexible disassembly of electric motors are being researched – based on the solution approach of “Wertstromkinematik” (value stream kinematics).
The collaboration between science and industry is expected to pay off for all project partners in both the short and long term: Schaeffler plans to transfer the findings to electric motor production at the Bühl location within a short time after the project ends. With the new Karlsruher Forschungsfabrik at KIT’s Campus East and the Schaeffler Hub for Advanced Research (SHARE), an infrastructure for research work on sustainable mobility already exists. (kla)
Participating Partners
In addition to KIT and Schaeffler, e-mobil BW GmbH and the following industrial partners are involved in AgiloDrive2: 4D GmbH, Braun Sondermaschinen GmbH, Carl Zeiss Industrielle Messtechnik GmbH, FormiKa GmbH, Gehring Technologies GmbH + Co. KG, Koob Testsystems GmbH, KUKA AG, LTB Bachofer GmbH, Magnet-Physik Dr. Steingroever GmbH, pro-beam systems GmbH, SCHUNK GmbH & Co. KG, Siemens AG, STAHL GmbH & Co. KG, TRUMPF Laser GmbH, and WAFIOS AG.
Read More
Press release on the AgiloDrive pilot phase: https://www.kit.edu/kit/english/pi_2020_030_agile-production-system-for-electric-motors.php
Website for the AgiloDrive pilot phase: https://www.wbk.kit.edu/wbkintern/Forschung/Projekte/AgiloDrive/index.php
Website of the Karlsruhe Research Factory: https://www.karlsruher-forschungsfabrik.de/en.html
Details about the KIT Mobility Systems Center: http://www.mobilitaetssysteme.kit.edu
Contact for This Press Release
Melanie Klagmann, Public Relations Officer at wbk Institute of Production Science, Phone: +49 1523 950 2612, Email: melanie.klagmann@kit.edu
Being “The Research University in the Helmholtz-Association,“ KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility and information. For this, about 9,600 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 23,300 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life. KIT is one of the German universities of excellence.
All latest news from the category: Automotive Engineering
Automotive Engineering highlights issues related to automobile manufacturing – including vehicle parts and accessories – and the environmental impact and safety of automotive products, production facilities and manufacturing processes.
innovations-report offers stimulating reports and articles on a variety of topics ranging from automobile fuel cells, hybrid technologies, energy saving vehicles and carbon particle filters to engine and brake technologies, driving safety and assistance systems.
Newest articles
Pinpointing hydrogen isotopes in titanium hydride nanofilms
Although it is the smallest and lightest atom, hydrogen can have a big impact by infiltrating other materials and affecting their properties, such as superconductivity and metal-insulator-transitions. Now, researchers from…
A new way of entangling light and sound
For a wide variety of emerging quantum technologies, such as secure quantum communications and quantum computing, quantum entanglement is a prerequisite. Scientists at the Max-Planck-Institute for the Science of Light…
Telescope for NASA’s Roman Mission complete, delivered to Goddard
NASA’s Nancy Grace Roman Space Telescope is one giant step closer to unlocking the mysteries of the universe. The mission has now received its final major delivery: the Optical Telescope…