Siemens reduces transport costs for offshore wind turbines by up to 20 percent

New transport vessel for Siemens offshore wind turbines: Starting in 2017, Siemens will have a shipping link between its new plant in Cuxhaven and international installation ports on the North Sea. (Copyright: Deugro)

At the EWEA 2015 international wind industry trade fair in Paris Siemens presented the company's new offshore logistics concept.

A key element of this is an improved transport solution. Siemens has signed a long-term framework contract with transport service provider deugro Danmark A/S, utilizing two purpose-built transport vessels to efficiently link Siemens' existing production locations in Denmark with the new production facilities in Cuxhaven in Germany and Hull in the UK. Instead of loading the up-to-75-meter-long rotor blades and nacelles weighing around 360 metric tons by crane, the large and heavy components will be rolled on and off of these vessels. This “Roll-on/Roll-off” process is known as Ro/Ro.

Siemens has utilized this method for many years. Based on this experience, the company's experts have further developed the concept and deugro will now provide tailor-made transport vehicles. Siemens estimates cost savings of 15 – 20 percent compared to current transport procedures, depending on the location of the offshore wind power plant.

“With our new logistics concept for D7 offshore wind turbines, we continue to leverage innovation and industrialization on our journey to lower the LCoE of offshore wind energy to below 10 cents per kilowatt hour,” states Michael Hannibal, CEO Offshore, Siemens Wind Power and Renewables Division.

“Our new production facilities are located directly at harbors to allow advanced Ro/Ro handling and cost efficient shipping of heavy components. This solution will enable us to save up to one fifth of the costs in the transportation chain, depending on the location of the specific offshore wind project.”

deugro Danmark A/S, an international transport company, will assist with shipping of the large Siemens components. Two special transport vessels, each with a length of approximately 140 meters, will be constructed. One of the purpose-built vessels can transport eight nacelles of the current Siemens D7 wind turbine platform at a time.

It will be launched as early as fall 2016. The second vessel will accommodate up to 12 rotor blades and transport them from the production facility in Hull, UK, or from Aalborg, Denmark, to the respective installation port. Both vessels can also be unloaded by crane when required. This enhances the flexibility of the installation ports, which are selected according to project-specific requirements.

In addition to the innovative cost-reducing transport concept, Siemens also presented optimization measures for installation and commissioning of offshore wind turbines. The D7 nacelle can be fully tested on the mainland. At the press conference, Michael Hannibal illustrated that comprehensive tests are planned directly in the future Cuxhaven production facility.

Further improvements aim to shorten installation and commissioning times and to reduce weather-related project delays. All of these measures will be implemented in the next months and contribute to the industrialization of the entire value chain in an effort to make offshore wind energy increasingly affordable.

More information about the Wind Power and Renewables Division is available at: www.siemens.com/wind

Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of gas and steam turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2015, which ended on September 30, 2015, Siemens generated revenue of €75.6 billion and net income of €7.4 billion. At the end of September 2015, the company had around 348,000 employees worldwide.

Further information is available on the Internet at www.siemens.com

This document contains statements related to our future business and financial performance and future events or developments involving Siemens that may constitute forward-looking statements. These statements may be identified by words such as “expect,” “look forward to,” “anticipate” “intend,” “plan,” “believe,” “seek,” “estimate,” “will,” “project” or words of similar meaning. We may also make forward-looking statements in other reports, in presentations, in material delivered to shareholders and in press releases. In addition, our representatives may from time to time make oral forward-looking statements. Such statements are based on the current expectations and certain assumptions of Siemens' management, of which many are beyond Siemens' control. These are subject to a number of risks, uncertainties and factors, including, but not limited to those described in disclosures, in particular in the chapter Risks in the Annual Report. Should one or more of these risks or uncertainties materialize, or should underlying expectations not occur or assumptions prove incorrect, actual results, performance or achievements of Siemens may (negatively or positively) vary materially from those described explicitly or implicitly in the relevant forward-looking statement. Siemens neither intends, nor assumes any obligation, to update or revise these forward-looking statements in light of developments which differ from those anticipated.

Reference Number: PR2015110088WPEN

Contact
Mr. Bernd Eilitz
Wind Power and Renewables Division
Siemens AG

Lindenplatz 2

20099 Hamburg

Germany

Tel: +49 (40) 2889-8842

bernd.eilitz​@siemens.com

All latest news from the category: Corporate News

Back to home

Comments (0)

Write a comment

Newest articles

Unidirectional imaging technology breakthrough

UCLA researchers developed unidirectional imaging technology, a crucial capability for applications requiring asymmetric visual information processing and optical communication. Traditional imaging systems are bidirectional—if I can see you, you can…

Implantable microparticles can deliver two cancer therapies at once

The combination of phototherapy and chemotherapy could offer a more effective way to fight aggressive tumors. Patients with late-stage cancer often have to endure multiple rounds of different types of…

Researchers Aim To Get Leg Up on Bone Repair with 3D-Printed Femur

University of Texas at Dallas mechanical engineers have designed a 3D-printed femur that could help doctors prepare for surgeries to repair bones and develop treatments for bone tumors. The engineers,…