Europe’s first R&D center for transparent ceramics

The new R&D center can produce transparent ceramics for various applications in differ-ent geometries on a pilot and series scale.
(c) Fraunhofer IKTS

Fraunhofer IKTS opens Europe’s first R&D center for transparent ceramics in Hermsdorf, Thuringia.

See-through like glass, but heat-resistant and scratch-proof like ceramics – transparent ceramics are unique materials. Their manufacturing requires not only special know-how, but also specialized equipment and systems. In future, transparent ceramics will be able to make even greater use of their advantages over glass and sapphire in terms of robustness, hardness, transmission and cost effectiveness. The reason: Fraunhofer IKTS has opened a new research and development center for transparent ceramics at Hermsdorf on August 29, 2024 in the presence of Thuringia’s Minister of Economics and Science, Wolfgang Tiefensee.

Fraunhofer IKTS aims to develop a variety of innovative, economical applications with interested industrial partners.

Novelty: Manufacturing transparent ceramic components on a pilot scale

The research and development center for transparent ceramics is unique in Europe. “We now have an infrastructure of the entire process chain for the production of transparent ceramic components, not only in the laboratory, but also on a pilot and series scale. This allows us to greatly expand our expertise and the range of applications for transparent ceramics,” says Dr. Sabine Begand, Head of the Oxide Ceramics department. This leap in expertise is now possible because IKTS has taken over the transparent ceramics division and the PERLUCOR® brand from CeramTec-ETEC.

A key component of the numerous systems in the R&D center is the hot isostatic press (HIP). This is where the ceramic components are thermally compacted at up to 2000 °C and 2000 bar - an important step in the process of achieving transparency.
A key component of the numerous systems in the R&D center is the hot isostatic press (HIP). This is where the ceramic components are thermally compacted at up to 2000 °C and 2000 bar – an important step in the process of achieving transparency. (c) Fraunhofer IKTS

Around 20 manufacturing systems and 100 small devices with a production area of 700 m² have since been integrated into the institute’s infrastructure at the Hermsdorf site. The Free State of Thuringia funded this initiative with 2.5 million euros. Industries that can benefit greatly from transparent ceramics include optics, opto-electronics, civil defense, security technology, medical technology, laser and sensor technology, scanner and display technology, the automotive and aerospace industries and mechanical engineering.

From powder preparation to shaping, design and analysis – new equipment covers the entire process chain

The new infrastructure includes equipment and systems for conditioning high-purity powders, shaping, heat treatment, laser and ultra-precision processing. “The most important tasks we have set ourselves,” emphasizes Dr. Martin Drüe, Group Head of Transparent Ceramics at Fraunhofer IKTS, ”are, on the one hand, to produce transparent ceramics in excellent quality on a pilot and series scale. Purity and high transparency play a decisive role here. On the other hand, we are looking forward to exciting, cutting-edge development work together with industrial partners. This will not only involve material analysis and development, design or shaping of the ceramics, but also application-specific issues relating to system integration. This is because it often concerns applications that require transparent ceramics in combination with other materials such as glass, titanium or precious metals.”

Industrial partners can use the technical infrastructure of the R&D center as a service, conduct trials and benefit from the results of mechanical tests, laminating and printing tests, for example. Prototypes and pilot series with quantities of approximately 10,000 units as well as an almost fourfold increase in component size will now be possible. The joining of transparent ceramics is also a focus of development in order to further increase the variety of geometries. The IKTS researchers have also set themselves the goal of steadily increasing the reproducibility of component production.

Transparent ceramics boast impressive hardness and transmission – high potential for competitive advantages in a wide range of applications

Transparent ceramics have outstanding mechanical and optical properties: The material is four times harder than glass and has significantly better transmission of light, both in the infrared and UV range. The material is also characterized by high scratch and temperature resistance as well as thermal conductivity. Due to its high hardness, the material is ideal for ballistic protection applications – for example, in combination with substrates such as glass or plastic, the component can be made significantly thinner with the same protective effect, which reduces material and thus weight. Transparent ceramics also offer advantages in areas such as autonomous driving, driver assistance, transportation, aviation and laser head protection systems. In addition to the excellent transmission and mechanical properties, the chemical stability and biological compatibility of transparent ceramics are ideal for applications in medical technology, such as microimplants. Interactive screens like head-up displays must also be robust and yet lightweight. This is required above all by manufacturers of mobile devices and other high-end applications, for which transparent ceramics are ideally suited.

Interested in learning more about the enormous advantages of transparent ceramics? Meet the IKTS experts at W3+Fair, September 25–26, 2024 in Jena, booth F5b, as well as at SPIE.Photonics West from January 25–30, 2025 in San Francisco in the German Pavilion.

Weitere Informationen:

https://www.ikts.fraunhofer.de/en/press_media/press_releases/2024_08_24_p_fraunh…

Media Contact

Dipl.-Chem. Katrin Schwarz Presse- und Öffentlichkeitsarbeit
Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

All latest news from the category: Materials Sciences

Materials management deals with the research, development, manufacturing and processing of raw and industrial materials. Key aspects here are biological and medical issues, which play an increasingly important role in this field.

innovations-report offers in-depth articles related to the development and application of materials and the structure and properties of new materials.

Back to home

Comments (0)

Write a comment

Newest articles

First-of-its-kind study uses remote sensing to monitor plastic debris in rivers and lakes

Remote sensing creates a cost-effective solution to monitoring plastic pollution. A first-of-its-kind study from researchers at the University of Minnesota Twin Cities shows how remote sensing can help monitor and…

Laser-based artificial neuron mimics nerve cell functions at lightning speed

With a processing speed a billion times faster than nature, chip-based laser neuron could help advance AI tasks such as pattern recognition and sequence prediction. Researchers have developed a laser-based…

Optimising the processing of plastic waste

Just one look in the yellow bin reveals a colourful jumble of different types of plastic. However, the purer and more uniform plastic waste is, the easier it is to…