Fast, cheap test can detect COVID-19 virus’ genome without need for PCR
Researchers at the University of Washington have developed a new test for COVID-19 that combines the speed of over-the-counter antigen tests with the accuracy of PCR tests that are processed in medical labs and hospitals.
The Harmony COVID-19 test is a diagnostic test that, like PCR tests for COVID-19, detects genetic material from the SARS-CoV-2 virus. But whereas conventional PCR tests can take several hours, the Harmony kit can provide results in less than 20 minutes for some samples and with similar accuracy.
“We designed the test to be low-cost and simple enough that it could be used anywhere,” said Barry Lutz, a UW associate professor of bioengineering and investigator with the Brotman Baty Institute for Precision Medicine. “We hope that the low cost will make high-performance testing more accessible locally and around the world.”
Lutz is senior author on a paper published Dec. 15 in Science Advances that describes the Harmony COVID-19 test kit. The researchers developed Harmony to be simple and easy-to-use, employing ready-to-use reagents. The test uses a “PCR-like” method to detect the presence of the SARS-CoV-2 RNA genome in a nasal swab sample with the aid of a small, low-cost detector, which was also designed by Lutz’s group. A smartphone is used to operate the detector and read the results. The detector can handle up to four samples at a time and would fit into a standard car’s glove compartment.
The accuracy of COVID-19 tests has been a pressing matter throughout the pandemic. Many at-home antigen kits for COVID-19, which detect pieces of the proteins the virus creates instead of its genetic material, are 80-85% accurate, though accuracy may drop with the omicron variant, which harbors a relatively high number of mutations not found in other strains. PCR tests are generally 95% accurate or better — a key FDA benchmark — but require expensive equipment and a long wait for results.
Initial results reported in the paper show that the Harmony kit is 97% accurate for nasal swabs. The Harmony kit detects three different regions of the virus’ genome. If a new variant has many mutations in one region, the new test can still detect the other two. It can, for example, detect the omicron variant, which has dozens of mutations in the region of the genome that encodes the so-called spike protein.
Though tests based on PCR — or polymerase chain reaction — are highly accurate, a key limitation is that PCR tests require dozens of cycles of heating and cooling to detect genetic material in a sample. The test developed by the UW team sidesteps this issue by relying on a PCR-like method known as RT-LAMP, which doesn’t have the same stringent temperature-cycling requirements.
“This test operates at a constant temperature, so it eliminates the time to heat and cool and gives results in about 30 minutes,” said Lutz.
Lutz and two colleagues spun out a new company from the UW, Anavasi Diagnostics, which last year was supported by $300,000 from WE-REACH and later received $14.9 million in grants from the National Institutes of Health to develop the Harmony prototype kit into a product and scale up manufacturing to help address the ongoing shortage of COVID-19 diagnostic tests.
Initially, Lutz and his team hope the kits could be made available first for use in clinics, as well as other settings with medical oversight, such as workplaces and schools. Later, they would like to adapt the test for home use.
“For a long time, the options have been either a PCR test that is expensive and typically takes a day or more to get a result, or a rapid antigen test that gives fast results and is low cost, but typically has lower accuracy than a lab PCR test,” said Lutz. “From the first day, we designed our test to be manufacturable at low cost and high volume, while delivering fast results with PCR-like performance.”
The NIH funding will support high-volume manufacturing at a new Anavasi facility near Seattle.
“We plan to make our test accessible and affordable throughout the world,” said Lutz.
Lead author on the paper is Nuttada Panpradist, a recent UW doctoral alum in bioengineering. Second author is Enos Kline, a UW research scientist in bioengineering, who initiated the project in early 2020. Co-authors in the Department of Bioengineering are doctoral students Robert Atkinson, Ian Hull, Qin Wang, and Shane Gilligan-Steinberg; research scientists Michael Roller, Jack Henry Kotnik, Crissa Bennett and Daniel Leon; and doctoral alum Amy Oreskovic. Other co-authors, all at the UW, are Victoria Lyon in the Department of Family Medicine; Matthew Thompson, a professor of global health and the Helen D. Cohen Endowed Professor in Family Medicine; Peter Han in the Department of Genome Sciences; Lea Starita, an assistant professor of genome sciences; and Paul Drain, an associate professor of global health, of medicine and of epidemiology. The research was funded by the Seattle Flu Study and the National Institutes of Health.
For more information, contact Lutz at blutz@uw.edu.
Grant numbers: R01AI140845, 5R61AI140460-03, U01HL152401
Journal: Science Advances
DOI: 10.1126/sciadv.abj1281
Method of Research: Experimental study
Subject of Research: People
Article Title: Harmony COVID-19: A ready-to-use kit, low-cost detector, and smartphone app for point-of-care SARS-CoV-2 RNA detection
Article Publication Date: 15-Dec-2021
All latest news from the category: Medical Engineering
The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.
innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.
Newest articles
Innovative 3D printed scaffolds offer new hope for bone healing
Researchers at the Institute for Bioengineering of Catalonia have developed novel 3D printed PLA-CaP scaffolds that promote blood vessel formation, ensuring better healing and regeneration of bone tissue. Bone is…
The surprising role of gut infection in Alzheimer’s disease
ASU- and Banner Alzheimer’s Institute-led study implicates link between a common virus and the disease, which travels from the gut to the brain and may be a target for antiviral…
Molecular gardening: New enzymes discovered for protein modification pruning
How deubiquitinases USP53 and USP54 cleave long polyubiquitin chains and how the former is linked to liver disease in children. Deubiquitinases (DUBs) are enzymes used by cells to trim protein…