Batteries: modeling tomorrow’s materials today

Microstructure simulations reveal strong influence of elastic deformation on the charging behavior of layered oxides used as cathode of sodium-ion batteries.

Research into new battery materials is aimed at optimizing their performance and lifetime and at reducing costs. Work is also underway to reduce the consumption of rare elements, such as lithium and cobalt, as well as toxicconstituents. Sodium-ion batteries are considered very promising in this respect. They are based on principles similar to those of lithium-ion batteries, but can be produced from raw materials that are widely accessible in Europe. And they are suitable for both stationary and mobile applications. “Layered oxides, such as sodium-nickel-manganese oxides, are highly promising cathode materials,” says Dr. Simon Daubner, Group Leader at the Institute for Applied Materials – Microstructure Modelling and Simulation (IAM-MMS) of KIT and corresponding author of the study. Within the POLiS (stands for Post Lithium Storage) Cluster of Excellence, he investigates sodium-ion technology.

Fast Charging Creates Mechanical Stress

However, cathode materials of this type have a problem. Sodium-nickel-manganese oxides change their crystal structure depending on how much sodium is stored. If the material is charged slowly, everything proceeds in a well-ordered way. “Sodium leaves the material Layer by layer, just like cars leaving a carpark story by story,” Daubner explains. “But when charging is quick, sodium is extracted from all sides.” This results in mechanical stress that may damage the material permanently.

Researchers from the Institute of Nanotechnology (INT) and IAM-MMS of KIT, together with scientists from Ulm University and the Center for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW), recently carried out simulations to clarify the situation. They report in npj Computational Materials, a journal of the Nature portfolio.

Experiments Confirm Simulation Results

“Computer models can describe various length scales, from the arrangement of atoms in electrode materials to their microstructure to the cell as the functional unit of any battery,” Daubner says. To study the NaXNi1/3Mn2/3O2 layered oxide, microstructured models were combined with slow charge and discharge experiments. The material was found to exhibit several degradation mechanisms causing a loss of capacity. For this reason, it is not yet suited for commercial applications. A change in the crystal structure results in an elastic deformation. The crystal shrinks, which may cause cracking and capacity reduction. INT and IAM-MMS simulations show that this mechanical influence decisively determines the time needed for charging the material. Experimental studies at ZSW confirm these results.

The findings of the study can be transferred partly to other layered oxides. “Now, we understand basic processes and can work on the development of battery materials that are long-lastin and can be charged as quickly as possible,” Daubner summarizes. This could lead to the widespread use of sodium-ion batteries in five to ten years’ time.

Original Publication (Open Access):

Simon Daubner, Manuel Dillenz, Lukas Fridolin Pfeiffer, Cornelius Gauckler, Maxim Rosin, Nora Burgard, Jan Martin, Peter Axmann, Mohsen Sotoudeh, Axel Groß, Daniel Schneider, Britta Nestler: Combined study of phase transitions in the P2-type NaXNi1/3Mn2/3O2 cathode material: experimental, ab-initio and multiphase-field results. npj Computational Materials, 2024. DOI: 10.1038/s41524-024-01258-x

Information on the POLiS Cluster of Excellence

More about the KIT Center Materials in Technical and Life Sciences

Detailed caption:

Section of a cathode layer (about 100 micrometers, left) consisting of spherical particles (of about ten micrometers in diameter, center) and simulation (right) of the sodium fraction in a sodium-nickel-manganese oxide crystal. (Graphics: Simon Daubner, KIT)

Being “The Research University in the Helmholtz Association”, KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility, and information. For this, about 10,000 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 22,800 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life. KIT is one of the German universities of excellence.

Journal: npj Computational Materials
DOI: 10.1038/s41524-024-01258-x
Method of Research: Experimental study
Subject of Research: Not applicable
Article Title: Combined study of phase transitions in the P2-type NaXNi1/3Mn2/3O2 cathode material: experimental, ab-initio and multiphase-field results
Article Publication Date: 18-Apr-2024