Fraunhofer ISE Inaugurates New Research Center for Batteries

Development of new battery technologies in the solid-state battery laboratory.
(c) Fraunhofer ISE

Batteries are a key building block for a successful energy transition, whether for the electrification of transport, the stabilization of the power grid or balancing fluctuations in green electricity. The Fraunhofer Institute for Solar Energy Systems ISE has been conducting research along the entire battery value chain for many years. With the inauguration of the Center for Electrical Energy Storage on october 22, the institute has access to state-of-the-art laboratories which enable cutting-edge international research. Currently the institute’s research focus is on improving the sustainability, safety and performance of battery storage systems.

The newly inaugurated competence center has a laboratory area of over 3,700 square meters and is located in the Haid industrial area in Freiburg. Within the facilities, Fraunhofer ISE will conduct research on innovative battery materials and cells, develop optimized solutions for battery systems and promote their integration into various applications, in addition to carrying out comprehensive quality assurance tests on bat-teries. Fraunhofer ISE offers development and testing services from a single source and caters to a wide range of customers, from material and battery manufacturers to equipment builders up to integrators and operators for electric mobility or stationary storage systems. The institute also cooperates with industrial partners on recycling and second-life concepts.

With its PV-hybrid storage system, the building itself serves as a living lab for the development of new operating strategies.
With its PV-hybrid storage system, the building itself serves as a living lab for the development of new operating strategies. (c) Fraunhofer ISE

The center was financed by the German Federal Ministry of Education and Research (BMBF) and the Baden-Württemberg Ministry of Economic Affairs, Labour and Tourism, which each contributed nine million euros. “We are grateful for this funding, which has enabled us to build a research infrastructure with state-of-the-art characterization instruments, industry-oriented process equipment and unique facilities. It allows us to develop new materials, technologies, production processes and applications in a practical manner together with our industrial customers or in close collaboration with Fraunhofer Battery Cell Research Production,” explains Institute Director Prof. Hans-Martin Henning.

In fact, the building itself serves as a living lab for research. In the “Haid-Power” project, which was funded by the state of Baden-Württemberg with three million euros, the center received a modular hybrid battery storage system with a capacity of 836 kWh, which, together with an 850 kilowatt photovoltaic system on the flat roof, supports the building’s energy supply. With this system, battery-based solutions for commercial and industrial use as well as new operating strategies like intelligent load management can be tested under real operating conditions. As part of the BMBF-funded “ecoLEPuS” project, a fast-charging station with buffer storage is being installed to test second-life batteries for use in high-performance applications.

Research Focus: Sustainability, Safety, Performance

Within the framework of the energy transition, between 300 and 800 gigawatt hours of stationary battery storage are to be installed in Germany by 2045, depending on the scenario. To this end, Fraunhofer ISE is addressing the sustainability of batteries in its research, for example, by investigating alternatives to lithium, developing sustaina-ble production processes and looking at second-life use and end-of-life recycling. In the current “PRONTO” project, for example, researchers are working on a sodium-ion battery technology that does not contain critical raw materials and can be manufactured in Baden-Württemberg.

With the rapid development of the battery market for both mobile and stationary applications, the need for investigations and tests on battery cells and systems contin-ues to increase significantly. By reducing costs and increasing performance, numerous potential applications for electrical energy storage systems can be opened up. Here too, researchers are working along the entire chain from materials to operational management to improve energy density and performance, the number of cycles and charging behavior.

“In our new center, we are able to perform characterization measurements from the microstructure level up to the overall system level, which enables us to identify defects and safety risks at an early stage. A safety issue that we are researching currently is propagation, a chain reaction in which one battery cell after another experiences thermal runaway, releasing large amounts of heat,” explains head of department Dr. Daniel Biro. “Our test team now has access to a unique laboratory infrastructure with sophisticated safety equipment, in which we can perform non-destructive tests and explosions on test specimens in special reinforced test rooms.”

Wissenschaftliche Ansprechpartner:

Dr.-Ing. Daniel Biro: daniel.biro@ise.fraunhofer.de

Weitere Informationen:

https://www.ise.fraunhofer.de/en/rd-infrastructure/center/center-for-electrical-… Website Center for Electrical Energy Storage

Media Contact

Claudia Hanisch Kommunikation
Fraunhofer-Institut für Solare Energiesysteme ISE

All latest news from the category: Power and Electrical Engineering

This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.

innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.

Back to home

Comments (0)

Write a comment

Newest articles

Towards zero-emissions by fuel-flexible technologies

New Finnish consortium brings cleaner solutions to marine and off-road transport. The Flexible Clean Propulsion Technologies (Flex-CPT) project consortium, led by the University of Vaasa, Finland, aims to develop innovative, clean,…

New method for producing innovative 3D molecules

A team led by chemist Prof Frank Glorius has synthesised so-called heteroatom-substituted cage-like 3D molecules. The innovative structures could help address key challenges in drug design by serving as more…

New method of flexing on electronics

A Virginia Tech team has devised a new method for creating soft, flexible electric connections across and through circuit layers, paving the way for advanced soft robotics, wearable devices, and…