New method of flexing on electronics

This soft circuit has two different layers, a top layer with nine LEDs and a bottom layer with nine sensors connected together with 21 liquid metal connections across the layers. The total thickness is similar to a few sheets of paper.
Photo courtesy of Michael Bartlett

A Virginia Tech team has devised a new method for creating soft, flexible electric connections across and through circuit layers, paving the way for advanced soft robotics, wearable devices, and more.

If a phone or other electronic device was made of soft materials, how would that change its use? Would it be more durable? If hospital health monitoring equipment was made of less rigid components, would it make it easier for patients to wear?

While electronics of that type may still be far in the future, Virginia Tech researchers have developed an innovative method for constructing the soft electronic components that make them up. The focus of a project from the team of Michael Bartlett, principal investigator and associate professor in the Department of Mechanical Engineering, is on the circuits that manage all the electronic connections inside.

Published in Nature Electronics, this novel technique uses liquid metal microdroplets to create a stair-like structure that forms small conductive passages called vias. These vias create electric connections through and across circuit layers without needing drilled holes in hardware, as previous techniques have.

“This brings us closer to exciting possibilities like advanced soft robotics, wearable devices, and electronics that can stretch, bend, and twist while maintaining high functionality,” Bartlett said.

First author for the publication was Dong Hae Ho, a postdoctoral researcher working with Bartlett. The Virginia Tech team was joined in this study by colleagues Ling Li, associate professor at the University of Pennsylvania, and Chenhao Hu, a Ph.D. student on Li’s team.

The work was supported by Bartlett’s Office of Naval Research Young Investigator Program award and National Science Foundation Early Faculty Career Development (CAREER) award, as well as support from Virginia Tech.

Soft electronics, vias, and interconnects

Previous soft circuit research developed by Bartlett’s team replaces inflexible materials with soft electronic composites and tiny, electricity-conducting liquid metal droplets. These soft electronics are part of a rapidly emerging field of technology that give gadgets a new level of durability.

In this project, researchers took on the problem of soft circuit boards, particularly the passing of electrical currents between the layers that stack on top of one another. This is important to make good use of electrical current in the tight space circuit boards occupy.

Whereas conventional rigid electronics utilize well-established techniques for creating vias, which are essential to make the multilayer electronics that are common today, they often require holes be drilled through a circuit board, which works when rigid materials are used to connect those layers. In a flexible material where a punched hole might stretch open, controlling that current requires a different approach.

The team’s new technique makes no holes and uses liquid metal microdroplets to form soft vias and planar interconnects, creating electrical connections through and across circuit layers, overcoming these challenges. The process involves the directed stratification of liquid metal droplets within a photoresin. By leveraging irregularities that arise during ultraviolet exposure, the researchers create a stair-like structure that allows the droplets to controllably assemble in 3D.

This approach is highly versatile, and these liquid metal vias and interconnects can be implemented in several types of materials. They can go further and perform the fabrication approach multiple times and create more and more layers.

Utilizing a bug as a feature

In known methods of creating electronics and other micro- and nanotechnologies, during ultraviolet exposure, imperfections known as mask-edge abnormalities, or undercutting, typically present challenges in standard manufacturing. However, the researchers have turned this bug into a feature: the edges of the ultraviolet-exposed regions cause the liquid metal droplets to settle and stratify in a stair-like, vertical pattern. This directed assembly allows the droplets to form a continuous pathway through the photoresin, connecting the top and bottom layers, which is then fully cured to lock the configuration in place. This process occurs simultaneously, and settlement of the droplets is quick, so that the process to make multiple vias takes less than a minute.

“By leveraging these otherwise unwanted edge effects, we can create soft, conductive vias that connect different circuit layers in a rapid and parallel fashion,” said Ho. “We can do this all while maintaining flexibility and mechanical integrity of the soft device.”

“By integrating with both in-plane and thru-plane circuit layers, it’s possible to create soft, flexible circuits with complex, multilayered architectures,” Bartlett said. “This enables new forms of soft electronics, where multiple soft vias and interconnects are created in a parallel and spatially controlled manner. This is crucial for advancing the field.”

Journal: Nature Electronics
Article Publication Date: 24-Oct-2024

Media Contacts

Margaret Ashburn
Virginia Tech
mkashburn@vt.edu

Chelsea Seeber
Virginia Tech
chelseab29@vt.edu

www.vt.edu

Media Contact

Margaret Ashburn
Virginia Tech

All latest news from the category: Power and Electrical Engineering

This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.

innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.

Back to home

Comments (0)

Write a comment

Newest articles

Innovative 3D printed scaffolds offer new hope for bone healing

Researchers at the Institute for Bioengineering of Catalonia have developed novel 3D printed PLA-CaP scaffolds that promote blood vessel formation, ensuring better healing and regeneration of bone tissue. Bone is…

The surprising role of gut infection in Alzheimer’s disease

ASU- and Banner Alzheimer’s Institute-led study implicates link between a common virus and the disease, which travels from the gut to the brain and may be a target for antiviral…

Molecular gardening: New enzymes discovered for protein modification pruning

How deubiquitinases USP53 and USP54 cleave long polyubiquitin chains and how the former is linked to liver disease in children. Deubiquitinases (DUBs) are enzymes used by cells to trim protein…