Perovskite research boosts solar cell efficiency and product life
Image of Perovskite cell
Credit: University of Surrey
An international team led by the University of Surrey with Imperial College London have identified a strategy to improve both the performance and stability for solar cells made out of the ‘miracle material’ perovskite by mitigating a previously hidden degradation pathway.
In a new study published in Energy and Environmental Science, Surrey’s Advanced Technology Institute (ATI) details how they, together with their collaborators, were able to produce lead-tin perovskite solar cells that reach more than 23% power conversion efficiency (PCE) – one of the best results achieved with this material and importantly, a design strategy which improves the lifetime of these devices by 66%. PCE refers to the amount of sunlight a cell can convert to usable electricity.
While silicon solar panels are used on many rooftops today, perovskite/silicon solar panels are emerging on the market, with fully “all-perovskite” panels with even higher efficiencies being anticipated to be the next big step with the technology. However, for this technology to be commercially viable, scientists need to tackle the challenge of improving both the stability and efficiency, especially around the lead-tin perovskite cell used in this design. This collaborative study initiated by the University of Surrey identifies previously hidden mechanisms that contribute to both efficiency and stability losses and addresses these challenges, helping the scientific community to advance this technology.
Hashini Perera, Ph.D. student and lead author of the study from the Advanced Technology Institute at the University of Surrey, said:
“The understanding we have developed from this work has allowed us to identify a strategy that improves the efficiency and extends the operational lifetime of these devices when exposed to ambient conditions. This advancement is a major step towards high efficiency, long-lasting solar panels which will give more people access to affordable clean energy while reducing the reliance on fossil fuels and global carbon emissions.”
To achieve these improvements, the research team focused on understanding the efficiency and stability losses induced by the hole transport layer which plays an important role in the solar cell performance. They introduced an iodine-reducing agent to inhibit the chemical reactions that cause the cells to degrade over time. This approach not only increased the efficiency of the lead-tin solar cells but also extended their lifespan, making them more practical and cost-effective for long-term use.
Dr Imalka Jayawardena, co-author of the study from Advanced Technology Institute at the University of Surrey, said:
“By significantly enhancing the efficiency of our perovskite-based solar cells, we are moving closer to producing cheaper and more sustainable solar panels. We are already working on refining these materials, processes and the device architecture to tackle the remaining challenges.
Professor Ravi Silva, Director of the Advanced Technology Institute at the University of Surrey, said:
“This research brings us closer to panels that not only generate more power over their lifetime but are also longer lasting. Greater efficiency and fewer replacements mean more green energy with less waste. The University of Surrey are in the process of building a 12.5MW solar farm, where we can test some of these modules. We’re confident that our innovative perovskite research will accelerate the widespread commercial adoption of perovskite-based solar panels.”
This research helps promote the UN Sustainable Development Goals 7 (affordable and clean energy), 9 (industry, innovation and infrastructure) and 13 (climate action).
- Ravi Silva, Imalka Jayawardena and W Hashini K Perera are available for interview, please contact mediarelations@surrey.ac.uk to arrange.
- The full paper is available in Energy and Environmental Science
- Images of the perovskite cells are attached
Journal: Energy & Environmental Science
DOI: 10.1039/D4EE03001J
Method of Research: Experimental study
Subject of Research: Not applicable
Article Title: 23.2% efficient low band gap perovskite solar cells with cyanogen management
Article Publication Date: 14-Nov-2024
Media Contact
Georgina Gould
University of Surrey
georgina.mehta@surrey.ac.uk
All latest news from the category: Power and Electrical Engineering
This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.
innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.
Newest articles
New theory reveals the shape of a single photon
A new theory, that explains how light and matter interact at the quantum level has enabled researchers to define for the first time the precise shape of a single photon….
Neuroscientists discover how the brain slows anxious breathing
Salk scientists identify brain circuit used to consciously slow breathing and confirm this reduces anxiety and negative emotions. Deep breath in, slow breath out… Isn’t it odd that we can…
Spinning fusion fuel for efficiency
Aligning the quantum property known as spin for fusion fuels could make it easier to generate electricity economically. A different mix of fuels with enhanced properties could overcome some of…